AID700 700W 3"x5" 醫療/工控雙認證電源

700W 3"x5"AC-DC 開放式電源供應器

AID700 系列

3" x 5" 緊湊尺寸設計，轉換效率最高可達 96%

支援強制風冷最高 700W 輸出、自然對流冷卻 400W，滿足靈活的散熱應用需求

超低空載輸入功耗（< 0.5W），符合高效節能標準

符合醫療（IEC 60601-1）與資訊通信（UL/IEC/EN 62368-1）安規標準，具備 Class I / Class II 絕緣架構並符合 EN 55032 Class B 電磁干擾規範

提供選配 12V 風扇輸出與 5V 待機輸出，便於系統靈活整合

廣泛適用於工業（Industry）、量測設備（Test）、工業電腦（IPC）及電信網通（Telecom）等應用領域

ABES technology co., ltd.

INPUT
Item	Conditions			Min		Typ		Max		Unit
Input Voltage	AC input			85				264		VAC
	DC input			120				370		VDC
Input Current	115VAC and Full Load							6		A
Input Frequency	AC input			47				63		Hz
Inrush Current	115VAC, cold start@25°C							50		A
	230VAC, cold start@25°C							70		A
No load Input Power								0.3		W
Power Factor	115VAC, full load					0.99				%
	230VAC, full load					0.96				%
Leakage Current	264VAC, 60Hz							400		uA
OUTPUT
Item		Conditions	Min		Typ		Max		Unit
Hold Up Time		At 115VAC,700W Load			12				ms
Line Regulation		90VAC to 264VAC at full load					±0.5		%
Load Regulation		No load to full load	±1						%
Transient Response		Deviation with a 50%-75%-50% load change 1A/μs, recovering to <1% within 500μs	4						%
Ripple & Noise		20 MHz bandwidth and 10 μF electrolytic capacitor in parallel with 0.1 μF ceramic capacitor	1						%
Fan Power		Offer output power of 12V/0.5A without put voltage accuracy ±15%
OPTIONAL STANDBY OUTPUT
Item		Conditions	Min		Typ		Max		Unit
Line Regulation		90VAC to 264VAC at full load	±10						%
Load Regulation		No load to full load	±10						%
Ripple & Noise		20 MHz bandwidth and 10 μF electrolytic capacitor in parallel with 0.1 μF ceramic capacitor	1						%
Remote On/Off		TBD

PROTECTION
Item	Conditions			Min	Typ		Max		Unit
Overvoltage Protection	Latch			110			140		%
Over Current Protection	based on 700W, Hiccup Mode			105			160		%
Short Circuit Protection	Hiccup Mode, auto recovery
Over Temp Protection	Hiccup Mode, auto recovery
ENVIRONMENTAL
Item		Conditions	Min			Typ		Max	Unit
Operating Temperature			-40					85	°C
Storage Temperature			-40					85	°C
Altitude								5000	m
Humidity		non-condensing	5					95	%RH
GENERAL
Item	Conditions
Isolation Voltage	Primary to Secondary			4000 VAC
	Primary to Earth			2000 VAC
	Secondary to Earth			1500 VAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG			100M Ohms / 500VDC
Isolation Level	Primary to Secondary			2 x MOPP
	Primary to Earth			1 x MOPP
	Secondary to Earth			1 x MOPP
SAFETY
Standard	Meets UL/IEC/EN 62368-1 ,EN/EN60601-1 ,CLASS I & CLASS II
EMC
Item		Standard
Conducted Emissions		EN55032:2012 +AC:2013 (CISPR 32:2012), Class B
Radiated Emissions		EN55032:2012 +AC:2013 (CISPR 32:2012), Class B
Harmonic Current emissions		EN61000-3-2:2014, Class A
Voltage fluctuations & flicker		EN61000-3-3:2013
Electrostatic discharge		IEC 61000-4-2:2008, Criteria A ; 15KV air ; 8KV contact
RS(Radiated)		IEC 61000-4-3:2010, Criteria A
Electrical fast transient/burst		IEC 61000-4-4:2012, Criteria A
Surge		IEC 61000-4-5:2014, Criteria A ; 4KV/Line-FG ; 2KV/Line-Line
Conducted Immunity		IEC 61000-4-6:2013
Magnetic Field		IEC 61000-4-8:2009, Criteria A
Dip and interruptions		EN61000-4-11

ABES technology co., ltd.

MODEL SELECTION TABLE
Model Number	output Voltage	Main Output (Current, Watt)				Standby and fan power supply total power 8W		Efficiency
Model Number	output Voltage	Convection		Forced-cooled		Standby and fan power supply total power 8W		Efficiency
AID700-S12	12VDC	33.4 A	400W	58.4A	700W			94%
AID700-S24	24VDC	16.6 A	400W	29.2A	700W			95%
AID700-S48	48VDC	8.3 A	400W	14.6 A	700W			96%
AID700-S54	54VDC	7.4A	400W	12.9 A	700W			96%
AID700-S12A	12VDC	33.4 A	400W	58.3 A	700W	5V/1A	12V/0.5A	94%
AID700-S24A	24VDC	16.6 A	400W	29.2A	700W	5V/1A	12V/0.5A	95%
AID700-S48A	48VDC	8.3 A	400W	14.6 A	700W	5V/1A	12V/0.5A	96%
AID700-S54A	54VDC	7.4A	400W	12.9 A	700W	5V/1A	12V/0.5A	96%

AID700 系列是一款高性能開放式（Open Frame）AC-DC 電源供應器，支援通用交流輸入（Universal AC Input），在強制風冷條件下輸出最高可達 700W，於自然對流冷卻下可提供 400W 輸出。其緊湊的 3" x 5"（76.2 x 127 mm）基底尺寸搭配 1.2"（30.5 mm）低高度設計，是空間受限系統的理想首選。

憑藉最高達 96% 的領先轉換效率以及超低空載輸入功耗（< 0.5W），AID700 系列能大幅提升系統能效，符合嚴格的全球能效法規標準。特色功能包含遠端開/關控制（Remote On/Off）、選配 12V 風扇輸出與選配 5V 待機電源輸出，進一步強化系統整合彈性與監控診斷能力。

該系列電源具備高度通用的雙重安規認證：醫療標準（IEC/EN 60601-1）與資訊/工控 ITE 標準（UL/IEC/EN 62368-1），並符合 Class I / Class II 絕緣防護及 EN 55032 Class B 電磁干擾（EMI）規範。極佳的相容性使其廣泛適用於全球醫療設備、工業自動化（Industry）、測試量測設備（Test）、工業電腦（IPC）及通信網路（Telecom）等高可靠度系統。

返回上一頁